When you finish making dough using a stand mixer, you should make sure to get off the dirt in the stand mixer before storing it. uou need : dish soap baking soda microfibre or cotton cloth small scrub brush toothpick or pipe cleaner instructions : 1. Unplug the appliance. Always unplug the appliance before cleaning 2. Hand-was attachments. Was beaters, hooks and pouring shield in warm, soapy water. Always dry attachments completely before storing or used. 3. Clean mixing bowl. Was mixing bowl in hot, soapy water or add it to a dishwasher load. If your mixed has a permanent home on the countertop, take the extra time to apply stainless steel cleaner to the bowl to remove water spots or blemishes. 4. Remove spills, splatters and food residue. After each used. wipe down the stand with a damp cloth or mild cleaner. Be careful not to leak liquids into ventilation parts or opening around knows and levers. Pay special attention to areas near the motor head. including speed control know and looking never-ingredients collect here when used regularly. 5. Clean though areas with baking soda. Using a small brush and a water-baking soda mixture. scrub crime or food rest particulary stubborn areas, like the speed control strip or bowl camp plate. 6. wipe inside attachment hub. unscrew the attachment hub plate and wipe interior 7. get under the motor head. to clean areas under the motor head (including the beater shaft). tilt the motor head back and lock into place 8. clean the beater shaft thoroughly. the saft and clip surrounding the saft both gather a lot of fine ingredients and need to be cleaned well. use a paper towel or small brush to remove flour and other ingredients. 9. pay attention to build-up. the rim on the back of the motor head casing collects dust and grime taht may go unnoticed. the lipped area underneath the motor head is a prime spot for splatters and food residue, as it is the rim of the bowl clamping plate and any exposed screws. use a small brush to remove grime and residue. 10. Remove crumbs and dust from the ventilation shaft. Used a toothpick, specially brush or vacuum to remove crumbs and dust from ventilation shaft. This area should always be clean to provide the best performance of your mixer 11. Dust and clean underneath. Lay mixed on its side to wide down the underside of appliance. Used a small brush or paper towel and mild cleaner to clean appliance foot pads Adoptep from: https://wws.thekitchn.come/how-to-clean-a-sand- mixed-229232 (11th December 2018) "....tilt the motor head back and lock into place" (step 7) which of the following words has similar meaning to the underline word?

Question

When you finish making dough using a stand mixer, you should make sure to get off the dirt in the stand mixer before storing it.

uou need :

dish soap
baking soda
microfibre or cotton cloth
small scrub brush
toothpick or pipe cleaner

instructions :

1. Unplug the appliance. Always unplug the appliance before cleaning

2. Hand-was attachments. Was beaters, hooks and pouring shield in warm, soapy water. Always dry attachments completely before storing or used.

3. Clean mixing bowl. Was mixing bowl in hot, soapy water or add it to a dishwasher load. If your mixed has a permanent home on the countertop, take the extra time to apply stainless steel cleaner to the bowl to remove water spots or blemishes.

4. Remove spills, splatters and food residue. After each used. wipe down the stand with a damp cloth or mild cleaner. Be careful not to leak liquids into ventilation parts or opening around knows and levers. Pay special attention to areas near the motor head. including speed control know and looking never-ingredients collect here when used regularly.

5. Clean though areas with baking soda. Using a small brush and a water-baking soda mixture. scrub crime or food rest particulary stubborn areas, like the speed control strip or bowl camp plate.

6. wipe inside attachment hub. unscrew the attachment hub plate and wipe interior

7. get under the motor head. to clean areas under the motor head (including the beater shaft). tilt the motor head back and lock into place

8. clean the beater shaft thoroughly. the saft and clip surrounding the saft both gather a lot of fine ingredients and need to be cleaned well. use a paper towel or small brush to remove flour and other ingredients.

9. pay attention to build-up. the rim on the back of the motor head casing collects dust and grime taht may go unnoticed. the lipped area underneath the motor head is a prime spot for splatters and food residue, as it is the rim of the bowl clamping plate and any exposed screws. use a small brush to remove grime and residue.

10. Remove crumbs and dust from the ventilation shaft. Used a toothpick, specially brush or vacuum to remove crumbs and dust from ventilation shaft. This area should always be clean to provide the best performance of your mixer

11. Dust and clean underneath. Lay mixed on its side to wide down the underside of appliance. Used a small brush or paper towel and mild cleaner to clean appliance foot pads

Adoptep from: https://wws.thekitchn.come/how-to-clean-a-sand- mixed-229232 (11th December 2018)

"....tilt the motor head back and lock into place" (step 7)

which of the following words has similar meaning to the underline word?